Note: To remove a CD image from your USB drive key, delete the subfolder containing the CD image and edit the g file at the root of the USB drive key to utility remove the section referencing that subfolder name.
Prerequisites: One or more of the following: Service Pack for utility ProLiant, intelligent Provisioning Recovery, hP SmartStart utility CD version.5x and greater.
1.1 includes SystemROM Floppy support and choice of English or Japanese installation.Version: Enhancements Upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.For example, utility mkdir /cd_mount_point.HP website and installed on a workstation.Insert a USB key containing the Firmware CD ISO image created by using the HP USB Key Creator for Windows utility into a usb port of your server or through the SUV (Serial-USB-Video) cable attached to the server to be updated if the server supports.Ver.2 of the utility will run on current utility Windows 64-bit OSs.Failure to issue utility this command might lead to a key that does not boot the Firmware CD until the syslinux command is successful.For Windows operating systems, the HP USB Key Creator for Windows utility must be downloaded from the.The HP USB Key Utility for Windows version.6 performs faster USB device formatting and supports USB flash devices up to 32GB.HP Smart Update Firmware DVD version.00 and greater.You can then run the Firmware Maintenance applications from a USB key instead of from the.Version: utility fixes, upgrade Requirement: Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version. After successful installation of the USB Key Utility, the USB flash drive can be used utility on supported ProLiant servers.
HP USB key utility, the HP USB Key Utility enables you to copy the Firmware Maintenance CD contents to a USB memory key.
Ensure that you are using a USB key that is at least 1GB in size and does not contain any valuable files.Reboot Requirement: Reboot is not required after installation for updates to patch take effect and hardware stability to full be maintained.Fixed an issue when using DVD Rewritable media as the number source.Version: Enhancements The HP USB Key Utility for Windows version.3 cell can install multiple CD images on a single kamen USB key.Mount /dev/sda1 /usbkey, issue the command./syslinux /usbkey to have syslinux write out the boot partition to the USB key.Insert the Firmware CD or mount the Firmware CD ISO through a loopback: mount /dev/cdrom /cd_mount_point or mount -t iso9660 football firmware- version.iso /cd_mount_point -o loop.Ver.1 fixes a minor issue with film the Cancel button and Override feature.This feature can be used with HP SmartStart CD version.30 or later and HP ProLiant Firmware Maintenance CD version.70 or later.For Linux, the USB key can be created manually: Obtain syslinux.2 or higher from t or m and download to a Linux workstation. After installation, episode the utility places a shortcut in the HP System Tools folder in the Programs start menu.
Version: Fixes Upgrade Requirement: Recommended - HPE recommends users update to this version at their earliest convenience.